Программа виртуальный осциллограф и генератор

Скачать подборку программ виртуальный осциллограф

VIRTINS Multi-Instrument эта программа превращает ваш компьютер в универсальный измерительный прибор, который вы можете использовать как: 2-х канальный электронный осциллограф, способный работать в реальном времени, анализатор спектра сигналов, генератор сигналов (большой набор функций сигналов, случайные сигналы, белый шум, розовый шум, качающиеся частоты), Дата-логгер, Мультиметр

oscillograv1 - Низкочастотный осциллограф через SoudBlaster V1

fgen1 и 2 - Функциональные генератор 1Hz - 20KHz (Stereo) через звуковую карту

Побробное описание возможностей программы VIRTINS Multi-Instrument на английском языке:

Major Functions: Oscilloscope: Dual-trace waveform, Waveform addition, subtraction & multiplication, Lissajous Pattern, signal recording. Various digital filters are supported
Spectrum Analyzer: Amplitude spectrum, octave analysis (1/1,1/3,1/6,1/12,1/24, 1/48, 1/96), frequency compensation, frequency weighting (A,B,C,ITU-R 468), peak hold, averaging, measurement of THD, THD+N, SNR, SINAD, Noise Level, IMD, Bandwidth and Crosstalk, phase spectrum, auto correlation function, cross correlation function, coherence function, transfer function (Bode plot), impulse response. Support 55 window functions and window overlap.
Signal Generator: Function/Multitone/Arbitrary waveform/Burst/MLS/DTMF/Musical Scales/White Noise/Pink Noise generation. Frequency/amplitude sweep. •4 Multimeter: Voltmeter, sound pressure level meter(dB, dBA, dBB, dBC), frequency counter, RPM meter, counter, duty cycle meter, F/V converter, cycle mean, cycle RMS, vibrometer.
Spectrum 3D Plot: It is used to trace the spectrum variation with time. Two types of plots are provided: waterfall and spectrogram
Data Logger: It provides long time data logging function for 129 derived variables, including RMS value, Peak Frequency, Sound Pressure Level, RPM, THD, etc. Up to eight data logger windows can be opened and each window can trace up to 8 variables. The logged data files can be reloaded into the data logger for review.
LCR meter: It is used to measure the value of an inductor, a capacitor or a resistor, or the impedance of a network of them.
Device Test Plan: Device Test Plan provides a mechanism for you to configure and conduct your own device test steps. It takes the advantage of the sound card's (or other ADC/DAC card's) capability of simultaneous input & output, to generate a stimulus to the Device Under Test (DUT) and acquire the response from that device at the same time. Different stimuli can be generated and the response can be analyzed in different ways.